Table 3 Comparison of experimental failure causes
From: Experimental study on three-dimensional shape mapping of complex furniture
Objects | Measuring times | Operational error |
|---|---|---|
Aroma bottle | 1 | The first attempt was affected mainly by the dual-camera sensor |
Unpainted carved panels | 4 | 1. The cabinet used to keep the object stable was not good. Objects can change position easily. |
2. The measured object height is not appropriate; the edge is difficult to clearly sweep to. | ||
3. The surface on which the object to be measured is placed is too large, and this affects the scanning of the partial scan angle. | ||
Painted carved panels | 2 | Support area is greater than the measured object, which leads to too many useless data points. |
Carved round stool | 3 | 1. Wrong position, wrong height, and the support surface is too large. |
2. The angle of the impact signal was not taken into account. |