Skip to main content

Table 7 Sync signal specification

From: Power-optimized log-based image processing system

Signals Values
‘0’ ‘1’
Rst Normal mode Resets and Initialize memory
M_cntrl Sync to Address controller Sync to R/W control
D_active Resets DWT-SPIHT and switch to Input mode Activates DWT. Sequentially control R/W sync and initiates SPIHT
ID_active Resets IDWT-ISPIHT and switch to input mode Activates ISPIHT. Sequentially control R/W sync and initiates IDWT
V_contl Stand by VGA process Activates VGA Process and VGA CLK